Electrician Services & Electrical Repairs in Bishop’s Stortford
From emergency repairs and fault finding to EICRs, fuse board upgrades, rewires, lighting and EV chargers, Spot Electrical is the local NICEIC-registered electrician for homes, landlords and businesses in Bishop’s Stortford. Choose a service below to see what it covers.
Electrical Repairs & Fault Finding in Bishop’s Stortford
Most of our calls start with something that has stopped working: an RCD that trips every time the kettle goes on, a run of sockets that has gone dead, a light that flickers, or a switch that has scorched. Electrical repair is mostly careful detective work, so we test the circuit properly to find the cause instead of swapping parts until the problem goes away.
Once we know what is wrong we explain it in plain English, tell you what the repair involves and agree the cost before we start. Sometimes that is a simple fix, sometimes it is a faulty appliance tripping the whole house, and sometimes it is a sign of a bigger problem that needs planning. Either way you get honest advice, and the circuit is tested again before we leave.
Emergency Electrician Call-Outs
We are open 24 hours, and emergency call-outs are a normal part of the week for us. If you have lost power, can smell burning, have water coming through a light fitting or can see damaged live wiring, phone us on 07977 635753 rather than using the form, so we can talk you through staying safe while we are on the way.
On an emergency visit the first job is always to make the installation safe and, where possible, get you back up and running. If the cause needs more investigation, we tell you exactly what we have done, what it cost and what we recommend next, then come back to finish the fault finding at a time that suits you.
If there is smoke, fire or anyone has had a shock, call 999 first. Switch off at the main switch only if it is safe to reach.
EICRs, Landlord Safety Certificates & Electrical Testing
An Electrical Installation Condition Report (EICR) is a health check of a property’s fixed wiring: the consumer unit, circuits, sockets, switches, earthing and bonding. We are registered with NICEIC for landlord electrical safety certificates and for PAT testing, so the report you receive is one your letting agent, insurer or buyer’s solicitor will recognise.
Since the Electrical Safety Standards in the Private Rented Sector (England) Regulations 2020, private landlords must have the installation inspected and tested at least every five years and give a copy of the report to their tenants. We also inspect homes that are being bought or sold, older properties where nobody knows the state of the wiring, and commercial premises whose insurers want proof of electrical safety. Any faults are graded clearly, and we can quote for the remedial work there and then.
Consumer Unit & Fuse Board Upgrades
If your home still has a fuse box with pull-out fuses, a plastic consumer unit or a board with no RCD protection, it is worth talking to us about an upgrade. A modern consumer unit switches off a faulty circuit in a fraction of a second, protects people against electric shock and, with surge protection, helps protect the electronics in your home.
Replacing a consumer unit is notifiable work under Part P of the Building Regulations. As an NICEIC Domestic Installer we test every circuit before and after the change, deal with any faults the new board shows up, and notify Building Control for you, so you receive an Electrical Installation Certificate and a Building Regulations compliance certificate. Since 2016 the wiring regulations have required consumer units in homes to be housed in a non-combustible enclosure, which in practice means a metal one.
Rewiring & New Circuits
Wiring does not last forever. Rubber or fabric-insulated cable, round-pin sockets, lighting circuits with no earth and a fuse box from decades ago are all signs that a rewire should be on the list. We rewire whole houses and single floors or rooms, and we often rewire kitchens as part of a refit, moving the board and adding the sockets and cooker feeds the new layout needs.
A rewire is disruptive, so we plan it with you: where the sockets, switches and lights should go, which rooms we start in and how we keep you with working power at the end of each day where we can. When it is finished, every circuit is tested and certified and the work is notified to Building Control.
Lighting, Sockets & Switches
A lot of our work is making rooms work better: extra double sockets where the extension leads are, a socket moved for a new TV position, dimmer switches, or replacing old halogen downlights with LEDs. No job is too small to ask about, and small jobs are done with the same care and testing as big ones.
Lighting is also where you can see our work best. We fit feature pendants and chandeliers, LED strip in coves, shelving and bathroom recesses, and wall lights, and we offer lighting design with Rako wireless lighting control so a room can be set to different scenes at the press of a button. The photos on this site are our own jobs.
Testing, lighting and finishing touches
A few more photos from our own jobs: a consumer unit under test, feature lighting and bathroom lighting.




EV Charger Installation
We install home electric vehicle charge points, including Pod Point and Vorsprung chargers. Every installation starts with a survey: we check your supply and consumer unit, agree where the charger will go and plan the tidiest cable route, whether that is a few metres through the wall or a run out to a detached garage.
Chargers sold for home use in Great Britain have had to be smart chargers since 2022, and a new charge point usually needs to be notified to the local network operator, UK Power Networks in this area. We handle the notification and certificates, and we test the installation so you can start charging with confidence.
Outdoor Power, Garden Lighting & Security
Outdoor electrics have to cope with rain, frost and garden tools, so they need the right cable, the right fittings and RCD protection. We run power to sheds, summer houses, workshops and garden offices, fit outdoor sockets for mowers and pressure washers, and install garden lighting that shows off the space in the evening.
We also fit security lighting, and we can wire in video doorbells and cameras. NICEIC’s register lists us for CCTV, alarms and security work as well as lighting.
Cookers, Showers, Appliances & Heating Controls
New cooker, hob or oven arriving? We check the circuit is suitable, connect it safely and disconnect the old one, which is handy when a delivery company won’t do the connection. We also fit and replace electric showers, cooker hoods, immersion heaters and timers, and electric heaters and radiators.
Heating controls are a common call too: thermostats, programmers and the wiring between a boiler and its controls. If the fault turns out to be on the energy supplier’s side rather than yours, we will tell you so and explain who to call.
Renovations, Extensions & New Builds
If you are renovating, extending or building, the electrics need to be planned into the project rather than added at the end. We plan and install the electrical side of new builds, refurbishments and extensions, and we are used to working alongside project managers, builders, architects, designers and other trades.
That means first fix before the plasterers, second fix when the decorating is done, and testing and certification at sign-off, whether you are managing the build yourself or working with a professional team. Local building companies use us on their projects too.
Commercial Electrical Services
NICEIC certifies us to work in homes, businesses and industrial sites, and a good part of our work is commercial: lighting and power in shops and commercial units, church and community halls, and other business premises. The photos of the shop, the commercial unit and the church hall on this site are all our own jobs.
For businesses we carry out periodic inspections and EICRs for insurers, PAT testing, lighting upgrades and fault finding, and we schedule the work to keep disruption to a minimum. Appointments are booked through our job-management system, so you know when we are coming and what we have done.
What customers say about our electrical work
“The obvious fix would have meant a lot of extra work. Gary found a smarter way round the problem that kept the cost down and left us with better control of our kitchen lighting.”
“Came out to our tripping fuse board as an emergency, made everything safe and then fitted a new board a few days later. Brilliant service.”
“Rewired our new kitchen and fitted new spotlights, sockets, switches and an extractor fan. Always on time, easy to get hold of and very tidy while he worked.”
Summarised in our own words from public reviews on Google and Checkatrade, with names left off.
Electrician and electrical repair questions
What should I do if a socket smells of burning or has scorch marks?
Stop using it straight away. If you can do so safely, switch off the circuit at the consumer unit, then call us on 07977 635753. Scorching usually means a loose connection or an overloaded socket, both of which can start a fire, so it is not something to leave until the weekend.
Is it safe to keep resetting a tripped RCD?
Resetting it once is fine. If it trips again straight away, or keeps tripping, it is telling you there is a fault, and repeatedly resetting it means repeatedly putting power back onto that fault. Unplug appliances on that circuit to see if one of them is the cause, and if not, call an electrician to test the circuit.
Do I need Building Control approval for electrical work?
Some domestic electrical work is notifiable under Part P of the Building Regulations in England, including new circuits, consumer unit replacements and certain work in bathrooms. As an NICEIC Domestic Installer we can self-certify that work and notify Building Control for you, so you do not need to apply separately.
Can you add sockets without rewiring the house?
Usually, yes. Extra sockets can normally be added to an existing circuit or a new circuit run for them, as long as the circuit is in good condition and can take the load. We test the circuit first, so if there is a problem we will tell you before any work starts.
How do I know if my house needs rewiring?
Warning signs include rubber or fabric-covered cables, round-pin sockets, sockets on skirting boards, lighting circuits with no earth wire, an old fuse box and frequent faults or tripping. An EICR is the best way to find out: it tells you what condition the wiring is in and whether a full rewire, a partial rewire or some targeted repairs make sense.
What is Rako lighting control?
Rako is a British wireless lighting control system. Instead of a row of separate switches, each room can have preset scenes, such as bright for cooking and soft for the evening, set from a keypad, a remote or an app. Because it is wireless it suits renovations and extensions where you do not want to chase in extra cables.
Need an electrician in Bishop’s Stortford?
Tell us what needs doing and we will call you back, or phone now for anything urgent.
